 HomeNews

2026-02-06

Safety Tips for Using Industrial Blow Molding Equipment

Industrial blow molding lines can deliver high output and consistent wall thickness, but they also concentrate multiple high-risk factors in one workstation: high-temperature melt, compressed air, hydraulics, moving platens, and automated material handling.
2026-02-06

How to Maintain and Clean Blow Molding Molds?

Blow molding molds sit at the intersection of heat, pressure, cooling water, and polymer additives. When a mold is not cleaned and protected correctly, the first symptoms usually show up as cosmetic defects, longer cycle time, unstable wall thickness, and higher scrap.
2026-02-05

What Types of Molds Are Used for Bottle Blowing?

Bottle blowing is not a single process. The mold design changes depending on how the preform or parison is formed, how the bottle is stretched, and how fast heat must be removed to lock in shape.
2026-02-05

How to Select the Right Manipulator for Production Lines

Choosing a manipulator is not only about “moving parts faster”. The right unit should match your cycle time, part geometry, workspace limits, and safety targets, while staying stable for long runs. In packaging and plastics production, a well-matched manipulator...
2026-01-29

Benefits of Robotic Arms in Blow Molding Production

In modern blow molding lines, efficiency is rarely limited by the forming step alone. The real bottlenecks often appear around it: preform handling, loading and unloading, hot-part transfer, sorting, and packing.
2026-01-28

What Is an Industrial Manipulator Robot for Molding?

An industrial manipulator robot for molding is a purpose-built automation arm that works alongside molding equipment to take parts out of the mold, handle runners or sprues, place parts onto conveyors, and support downstream steps like cooling, counting, stacking, or packing. In molding operations, seconds matter.
2026-01-27

How to Optimize Packing Machine Performance?

Packing lines rarely lose performance for a single reason. Output usually drops because multiple small factors stack up: unstable infeed, inconsistent product presentation, sealing temperature drift, worn wear-parts, and setup parameters that no longer match your current packaging material or pack format.
2026-01-26

Differences Between Manual and Automatic Packing Machines

In the highly competitive packaging industry, selecting the right packing solution is a strategic decision that directly impacts production efficiency, cost management, and product quality. As a trusted manufacturer and supplier of industrial packing machines, BOHANG understands these challenges and offers a full spectrum of solutions tailored to meet diverse operational needs.
2026-01-23

How Does an Automatic Cap Packing Machine Operate?

High-volume cap production lines live or die by one thing: keeping caps moving without jams, scuffs, or counting mistakes. An automatic cap packing machine is built for exactly that job. It takes finished caps coming from molding or sorting, then transfers them into cartons in tidy layers with consistent counts, reducing manual handling and stabilizing packing quality.
2026-01-22

How to Maintain a PET Bottle Blowing Machine?

Stable bottle quality and predictable output depend on one thing more than most teams expect: disciplined maintenance. A PET bottle blowing machine runs through continuous heating, high-pressure air cycles, repeated mold clamping, and fast mechanical motion.

Request A Quote

* Your Name

This value is required!

* E-mail

This value is required!

* Mobile / WhatsApp

This value is required!

Your Company

Message

This value is required! Minimum is 20 characters

Home